Read the video’s transcript:

1. Download the learning material by clicking on the button at the bottom of this page.
2. Drag and drop the provided STL file from your folder
1. Open Marketplace.
2. Select Plugins > Mesh Tools > Install.
3. Select object.
4. Right Click > Mesh Tools > Split Model into Parts to Break Model.
5. Arrange them as you need.
6. Slice and check the time!
1. Go to Print Settings > Infill
2. Set Fill Density: 0%
3. Slice and check the time!
1. Go to Print Settings > Walls
2. Change Vertical Shells > Perimeters: 1
3. Slice and check the time!
1. Go to Print Settings > Top/Bottom
2. Change Bottom Layers: 0
3. Slice and check the time! 2h40m
1. Activate Brim.
2. Go to Print Settings > Build Plate Adhesion
3. Change Brim width: 4mm
4. Slice and check the time!
1. Go to Print Settings > Top/Bottom
2. Change Top Layers: 1
3. Slice and check the time!
1. Click on the Export G-code button.
2. Save the file.

Exercise 4 - UltiMaker Cura: The Masterplan