Read the video’s transcript:

1. Download the learning material by clicking on the button at the bottom of this page.
2. Drag and drop the provided STL file from your folder.
  or
  Go to File > Import STL
1. Go to Print Settings > Build Plate Adhesion
2. Change the following values:
  - Build Plate Adhesion Type: Skirt
  - Skirt Line Count: 10
  - Skirt Distance: 50mm
1. Click on Slice button
1. Take the handle of the Slices Bar at the right part of the screen all the way down.
2. You can Verify if all the model touches the plate.
1. Click on the Export G-code button.
2. Save the file.

Exercise 1 - UltiMaker Cura: The Flat Cube