Read the video’s transcript:

1. Download the learning material by clicking on the button at the bottom of this page.
2. Drag and drop the provided STL file from your folder
  or
  Go to File > Import STL
1. Go to Print Settings > Skirt and Brim
2. Change the following values:
  - Loops minimum: 10
  - Distance from object: 50mm
  - Skirt Height: 1 layer
  - Draft shield: Unchecked
1. Click on Slice button
1. Take the Slices Bar at the Right part of the screen all the way down.
2. Verify that the whole model touches the plate.
1. Click on the Export G-code button.
2. Save the file.

Exercise 1 - PrusaSlicer: The Flat Cube